|
|
Definition: Torque Limiter (Safety Couplings) Torque Limiter used to protect machines (Safety Couplings) and equipments against damages. The drive is disconnected, when the torque is higher than the disengagement torque of the coupling. All Torque Limiters works at the same princip by us. Application of Torque Limiter With increasing automation of production lines those components are gaining rising importance, which in case of overload protect machines from damages or iniate automatical shut off. The performance rates e.g. of servo drives especially in NC-machine tools are raised from year to year. Combined with it the rapid traverse rates increase. At these high-speed movements in the machine, a collision results in severe machine damage and expensive outage time. Safety Couplings are used to protect against these damages or at least to reduce them. Torque Limiter can be used everywhere in such equipment where torque limitation is necessary in order to protect machinery or products against overloading. special characteristics: • low-play torque transmission, robust, compact, small installation space requirements • unaffected by oil and grease, automatic reengagement • machine reference is retained (one reference per 360°) • continously adjustable disengegement torque • low mass, very low moment of inertia |
||||||||
| selection acc. your application | download cataloque  |
|||||||
| 3-D CAD-files | ||||||||
|
ECP ECK ECU ECA ECPB ECKH ECPD ECUD ECKE ECOL ECI ECB ECE ECG ECH ECR |
||||||||
| Torque Limiters | ||||||||
| with integrated ball bearing (for direct mounting of a pulley) and mounting friendly clamping hub compact performance |
 |
the drive element does not need its own bearing on the shaft shaft connection with clamping hub | ||||||
| NEW ! with integrated ball bearing (for direct mounting of a pulley) compact performance |
 |
the drive element does not need its own bearing on the shaft shaft connection with conical hub | ||||||
| NEW ! with integrated ball bearing (for direct mounting of a pulley) compact performance |
 |
the drive element does not need its own bearing on the shaft shaft connection with keyway | ||||||
| with integrated ball bearing successfull standard torque limiter |
 |
the drive element does not need its own bearing on the shaft shaft connection with conical hub (or keyway) | ||||||
| with metal bellow coupling and mounting friendly clamping hub on both sides compact performance |
 |
the metal bellow can compensate shaft misalignments shaft connection with clamping hub | ||||||
| NEW ! with metal bellow coupling and conical hub on both sides compact performance |
 |
the metal bellow can compensate shaft misalignments shaft connection with conical hub | ||||||
| with elastomer coupling and mounting friendly clamping hub on both sides compact performance |
 |
the elastomer spider can compensate shaft misalignments shaft connection with clamping hub | ||||||
| NEW ! with elastomer coupling mounting friendly clamping hub on the shaft coupling side keyway on the safety part compact performance |
 |
the elastomer spider can compensate shaft misalignments shaft connection with clamping hub and keyway | ||||||
| with elastomer coupling and conical hub on both sides compact performance |
 |
the elastomer spider can compensate shaft misalignments shaft connection with conical hub | ||||||
| with integrated slide bearing and mounting friendly clamping hub compact performance |
 |
the drive element does not need its own bearing on the shaft | ||||||
| with bearing for extra-wide pulleys shaft connection with keyway |
 |
a slide bearing must be incorporated in the drive element by the customer | ||||||
| for various drive units |  |
the drive element must have its own bearing on the shaft shaft connection with conical hub | ||||||
| compact, axially short version shaft connection with keyway |
 |
the drive element must have its own bearing on the shaft | ||||||
| with small bearing for drive elements (small pulleys or chain wheels) shaft connection with keyway |
 |
a slide bearing must be incorporated in the drive element by the customer | ||||||
| compact design with integrated sprocket and slide bearing shaft connection with keyway |
 |
interchangeable with slip clutches the drive element does not need its own bearing on the shaft | ||||||
| all parts STAINLESS STEEL (including the disc spring) shaft connection with keyway |
 |
a slide bearing must be incorporated in the drive element by the customer types ECE, ECG and ECI are also available in STAINLESS STEEL | ||||||
 | ||||||||
| Torque Limiters | ||||||||
Torque Limiter ECE from ENEMAC Torque Limiter type ECH with integrated chain wheel |
| torque limiters, safety couplings, overload clutches, limiteur de sécurité, limiteur de couple, limitatore de par, limitatori di coppia, giunti di sicurezza |
| © 2011 ENEMAC |